3p offers mineral-filled compounds, based on PE/PP/PS, that contain Caco3, talk, Baso2 and others. Depending on the application, they can impart properties to film and molded articles that include increased stiffness or a paper-like appearance. Other advantages may include increased efficiencies through more rapid cooling of the film bubble and reduced energy consumption during processing. These masterbatches typically contain 30-80% mineral content in a polymer carrier. 3p filler masterbatches offer a convenient way of incorporating Caco3 and other minerals in thermoplastics, without contamination by dust. They have perfect dispersion and optimized flow properties, ensuring easy processing. Filler masterbatches are used in injection, Blow-moulding, Film, Sheet and Tapes applications

 

:They offer the following advantages

 

flashInjection & blow-moulding

 

Lower raw materials cost, as they are usually more economic than polymer resins

 

Increased output due to faster mould cooling.

 

Reduction of colour masterbatch requirement

 

Higher resistance to heat deflection, higher rigidity and stiffness

 

Improved dimensional stability, weldability and printability

Addition rate of FILLER masterbatches in injection & blow-moulding applications can be up to 50 %, however, most usual levels are between 5-30%

flashFilm, sheet, sacks, bags
Lower raw materials cost, as they are usually more economic than polymer resins

 

Reduction of colour masterbatch requirement

 

Higher stiffness, paper-like effect

 

Improved weldability and printability

 

Improved anti-blocking properties

 

Better bubble stability

Addition rate of FILLER masterbatches in film applications is 2-8%

 

flashPE & PP tapes

 

Anti-fibrillation – also known as anti-splitting

 

Lower raw materials cost, as they are usually more economic than polymer resins

 

Reduction of colour masterbatch requirement

 

Higher stiffness

 

Improved weldability and printability

 

Improved anti-blocking properties

 

Improved weaving ability

 

Easier processing

Usual addition rate of FILLER masterbatches in tapes is 3-8%

FILLER MASTERBATCH